Abdolkhani, ali
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014, Pages 484-492]
Abdolkhani, Ali
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Abdolzadeh, Hamideh
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Aenayati, Aliakbar
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014, Pages 493-501]
Aenayati, Aliakbar
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Afra, Elyas
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
Aibaghi esfahani, Hamid
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
Akbari, Moghadaseh
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Akbarpour, Iman
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Alishahi, Mohammad
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Alizadeh, Hassan
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Amiri, Parviz
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Amiri, Sohil
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Asadi khoramabadi, Lila
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Asadpour atoei, Gasem
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Azizi, Majid
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
B
Balapour, Shamsaldin
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Barrani, Ebrahim
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014, Pages 156-169]
Bayatkashkoli, Ali
Comparing the mechanical strength of wooden chairs constructed using two patterns and mortise and tenon and dowel joints [Volume 29, SPRING 1, 2014, Pages 67-78]
Behzadi Shahrebabak, Amineh
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Bordi Fotouhifar, Khalil
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
D
Daday Ghandi, Sadigheh
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Dalirzadeh, Amin
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Dehghani firozabadi, Mohammad reza
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Dehghani firuzabadi, Mohammad reza
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Doosthosseini, Kazem
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Doosthosseiny, Kazem
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
E
Ebrahimi, Ghanbar
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Enayati, Ali kabar
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Eraghi, Mohammad Kazem
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014, Pages 156-169]
F
Faezi pour, Mohamad mehdi
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Falah, Asghar
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Farajpoor Roodsari, Arash
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014, Pages 142-155]
Farajpoor Roodsari, Arash
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Farhadi, Zinat
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Farokhpayam, Saeid reza
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Farokh payam, Saeid reza
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
Frozan, Zibab
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2015, Pages 572-580]
G
Ghamari, Reza
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2015, Pages 572-580]
Ghasemi, Hanieh
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Ghasemian, Ali
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014, Pages 335-345]
Ghasemian, Ali
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Ghasemieh, Mehdi
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Ghofrani, Mohammad
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Golbabaei, Fardad
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Golbabaei, Fardad
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Golbabaei, Fardad
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2015, Pages 633-643]
Golbabaei, ّFardad
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
H
Habibi, Masoudreza
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014, Pages 34-43]
Hafezi, Seaid Masoumeh
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Hajihassani, Reza
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 390-398]
Haji rafiriha, Ehsan
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Hasanjanzadeh, Hadi
The effect of polyelectrolyte on drainage and soda-AQ pulp strength of rice straw [Volume 29, SPRING 1, 2014, Pages 170-181]
Hashemi, Seyed_Pedram
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Hashemi, Seyyed Peyman
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Hashemi Beygzadmahalleh, Seyyed Pedram
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Hashemi Beygzadmahalleh, Seyyed Peyman
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Hatefnia, Hamid
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014, Pages 493-501]
Hezbi, Nazbakht
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
Hosseinkhani, Hossein
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Hosseinkhani, Hossein
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2015, Pages 633-643]
Hosseinkhani, Hossein
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Hosseinkhani, Hossein
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2015, Pages 594-608]
J
Jahani, Yosef
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
Jahanilomer, Zahra
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014, Pages 376-389]
Jahani lomer, Zahra
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014, Pages 242-253]
Jahan latibari, Ahmad
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Jahan latibari, Ahmad
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Jahan Latibari, Ahmad
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Jahan Latibari, Ahmad
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Jahan latibary, Ahmad
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Jalali trshizy, Hossein
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Jalalvand, Sahar
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Jalilvand, Hamid
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Jamshedzadeh, Mehdi
Comparing the mechanical strength of wooden chairs constructed using two patterns and mortise and tenon and dowel joints [Volume 29, SPRING 1, 2014, Pages 67-78]
Jazayeri, Reza
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
K
Kabodi torabi, Nadia
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Kalagar, Mehdi
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
Karami motaghi, Lila
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Kargarfard, Abolfazl
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Kargarfard, Abolfazl
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Kargarfard, Abolfazl
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Kermanian, Hossein
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Keshtegar, Bratali
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Khazaeian, Abolghasem
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Khazaeyan, Abolghasem
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014, Pages 464-473]
Khojasteh khosro, Saeid
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Kiaei, Majid
Investigation on wood properties of eldar pine and its relations to soil chemical and physical characteristics (in western of Mazandarn province platation) [Volume 29, Summer 2, 2014, Pages 199-207]
Kohan torabi, Mostafa
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Kouhpayehzadeh, Moghgan
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
L
Lari, Jalil
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Layeghi, Mahammad
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Layeghi, mohammad
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014, Pages 484-492]
Layeghi, Mohammad
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
M
Madhoushi, Mehrab
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Mahdavi, Saeid
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014, Pages 34-43]
Marzban moridani, Elham
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
MARZBAN MORIDANI, ELHAM
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites [Volume 29, Fall 3, 2014, Pages 443-451]
Masteri Farahani, Mohammad reza
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
MastriFarahani, Mohammad reza
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Mehri, Elahe
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014, Pages 335-345]
Mehri Iraie, Hamid reza
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Mir, Samaneh
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
Mirshkraee, Ahmad
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Mirshokraee, Ahmad
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Mirshokraei, Seiad Ahmad
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Mirshokraie, Seeyed Ahmad
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2015, Pages 538-549]
Morshedian, Jalil
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
Mstaghni, Fatemeh
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
N
Nasiri, Seid Atefeh
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Nazerian, Morteza
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
Nazeryan, Morteza
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Nourbakhsh, Amir
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Nourbakhsh, Amir
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
O
Ostadi, Elham
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
P
Pangh, Halimeh
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Payan, Mohammad hassan
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014, Pages 434-442]
Pourmosa, shadman
Wood anatomy of an Iranian mangrove plant Avicennia marina (Forsk) Vierth [Volume 29, WINTER 4, 2015, Pages 561-571]
R
Rahimi dastjerdi, Habib
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Rahmani nia, Mehdi
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Ramezani, Omid
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Rangavar, Hossein
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014, Pages 434-442]
Rassam, Ghonche
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Resalati, Hossein
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Resalty, Hossein
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
Rezaei niaraki, Porya
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Rmazani, Omid
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Rodi, Hamidreza
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Rohnya, Mehran
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Roohnia, Mehran
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Roohnia, Mehran
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Rrsalati, Hossein
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
S
Saraeian, Ahmad reza
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Saraeyan, Ahmad reza
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Sepidehdam, SeaidJavad
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014, Pages 354-367]
Sepidehdam, Seid Javad
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Shahbazi, Hossein
Selection and determination of the effective factors on packaging paper
print quality using design of experiments [Volume 29, SPRING 1, 2014, Pages 12-22]
Shakeri, Alireza
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Shamsian, Mohammad
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014, Pages 242-253]
Shamsian, Mohammad
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014, Pages 376-389]
Solhnejad, Reza
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Sotudeh, Arash
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014, Pages 354-367]
T
Tabei, Asghar
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Tabei, Asghar
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014, Pages 142-155]
Tabei, Asghar
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Tabei, Asghar
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Taghiyari, Hamid Reza
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Tajadini, Azhang
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Tajdini, Aghang
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Tajidini, Ajang
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Talaeipoor, Mohammad
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites [Volume 29, Fall 3, 2014, Pages 443-451]
Taremian, Asghar
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Taremian, Asghar
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Y
Yekekhani, Mohssen
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Z
Zamani, Amir
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Zarea bidkei, Saeideh
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Zyaei, Mohssen
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]